Eco Foam installed in home

Residential Spray Foam Insulation – Edmonton & Surrounding Areas

Northern Spray Solutions strives to provide the best residential spray foam insulation services with customer satisfaction as our number one priority.  We provide spray foam insulation from your basement, garage to your attic for your whole house. We supply a variety of Residential services from North of Red Deer, to Edmonton, Spruce Grove, Stony Plain and surrounding areas including Fort McMurray and Grande Prairie, services includes:

• CCMC approved 2 lb. polyurethane spray foam
• Deck coatings
• Concrete protection, sealing &  coatings

Spray foam doesn’t contain formaldehyde, ozone depleting substances, or harmful fumes and is recognized by LEED® (Leadership in Energy & Environmental Design) as a sustainable, green, CO2 reducing construction material.

Improved Air Quality & Comfort for your Home

• by expanding to perfectly fill every space, Foamsulate ECO stops air leakage in and out, and prevents pollutants, dust and allergen infiltration
• spray foam does not support mould and mildew as an effective vapour barrier, spray foam keeps moisture out
• spray foam reduces noise pollution
• spray foam does not emit any gasses and won’t negatively affect indoor air quality

Insulating the Header Area with Spray Foam. Keeping the heat in!

Lasting Strength & Value with Spray Foam for your Home

• Spray foam does not settle, sag, shrink, or deteriorate. It stays in place providing value year after year.
• Spray foam ads structural strength. It does not have fasteners or seams which can reduce strength.
• Spray foam walls have three times greater racking strength.
• It will reduce heating & cooling HVAC operating costs and the initial cost investment since it requires smaller equipment with less cost.

Spray Foam Insulation for Attic

In addition to providing one of the best options for insulating your attic with spray foam, it can also help protect your home from moisture and other weather related damages, from your attic to your basement.

A few of the main benefits from Attic Spray Foam insulation are, less heat loss or gain with duct leakage. Air sealing is easier, less likely to have dust and loose insulation travel to the living space and overall energy costs are lower.

Spray Foam Insulation for Basement Walls

Spray foam insulation is one of the most effective ways to turn your basement walls into a dry, comfortable, energy-efficient part of your home. It fills every gap and hard-to-reach space, creating a continuous barrier that helps block moisture, reduce drafts, and keep temperatures consistent year-round. Because it adheres directly to the wall surface, it also helps prevent condensation and the mold issues that often come with it. If you want a basement that feels solid, protected, and ready for finishing or long-term use, spray foam gives you a level of performance traditional insulation materials can’t match.

Spray Foam Insulation for Garage

Spray foam insulation is also an excellent solution for your garage walls and ceilings, helping maintain consistent temperatures year-round. Whether your garage is attached or detached, properly insulating it can prevent drafts, reduce condensation, and protect your home from heat loss through adjoining walls.

Using closed-cell spray foam, our team seals every gap and crack to create a solid air and moisture barrier. This adds structural strength, reduces outside noise, and helps keep the space comfortable even in Alberta’s extreme weather. The product used, such as Seal Tite Pro HFO, is now approved for residential applications, offering a high R-value and long-term performance that meets modern building standards.

Benefits of garage spray foam insulation:

• Prevents heat loss through adjoining walls and ceilings

• Reduces cold drafts and moisture buildup

• Adds rigidity and strength to the wall structure

• Approved for residential use under updated HFO standards

• Helps regulate temperatures if your garage is heated or used as a workspace

Roof & Deck Protective Coatings

Alongside insulation, Northern Spray Solutions offers protective roof and deck coating services designed to keep your home safe from water damage and everyday wear. These coatings form a durable, seamless barrier that prevents leaks, protects surfaces from Alberta’s harsh freeze-thaw cycles, and extends the lifespan of your roof or deck.

Whether it’s a flat roof, walk-out balcony, or outdoor deck, our coating systems provide a strong layer of protection against moisture, UV rays, and temperature fluctuations. Unlike traditional sealants that can peel or crack over time, our coatings bond tightly to the surface and remain flexible, ensuring long-lasting results with minimal maintenance.

Benefits of Roof & Deck Coatings:

• Waterproofing: Creates a leak-resistant seal that protects living spaces below from water penetration.

• Durability: Withstands extreme weather conditions including snow, ice, and direct sun exposure.

• Energy Savings: Reflective coatings can reduce heat absorption, lowering cooling costs in summer.

• Low Maintenance: A seamless finish that resists cracking, peeling, and deterioration.

• Peace of Mind: Protects your investment by extending the service life of your roof or deck.

Our team uses only CAN/ULC-approved products designed for residential use, giving you confidence that the job is done right and in compliance with building standards. Homeowners across Edmonton and surrounding areas trust our coating services for both new builds and renovation projects.

Prevent Heat & Cold Air infiltration & Leakage in your Home

These are the many areas that heat and cold and air infiltration and leakage occur that can double your energy bill and compromise the health and indoor quality of your home or building. Polyurethane spray foam from addresses each of these and provides the maximum insulation available while sealing out harmful pollutants and allergens saving you significant money and protecting your health.

1. Radiant heat and cold
   

   Reduce Heat Loss in your Home with Spray Foam Insulation

2. Roof penetration (plumbing vent stacks, exhaust fans, etc.)
3. Uninsulated ducts
4. Leaking ducts
5. Recessed Lights
6. Attic Insulation
7.  Hatch/Stairs
7. Wall top plates
8. Window Framing
9. Electrical wall outlets
10. Wall light Switches
11. Unsealed Chases between floors
12. Dropped soffits
13. Plumbing penetrations, pipe & duct runs
14. Band boards between floors
15. Fireplaces and chimneys
16. Sill plates
17. Door framing
18. Appliance Vents
19. Outdoor Faucets
20. Crawl Spaces
21. Uninsulated basement walls.

Spray foam insulation has been used for over 30 years.  With the state of the art equipment that Northern Spray Solutions uses guarantees proper installation and top quality product.

Talk to us about big savings on residential spray foam insulation from basement insulation to attic insulation for your whole house. See about more information on spray foam insulation cost.

Applied to Industry Standards

Northern Spray Solutions spray foam is exclusively applied by licensed applicators who have been trained to the specifications of the Standard For Thermal Insulation Spray Applied Rigid Polyurethane Foam CAN/ULC 705.2.

Energy Efficiency and Air Quality

Spray foam helps conserve energy by reducing CO2 emissions. It is LEED® recognized for sustainable green construction and it does not contain formaldehyde or ozone-depleting substances.

Download our Foamsulate Eco polyurethane spray foam info sheet (PDF document) by clicking on the image below:

Call us at 780-963-4493 for a spray foam insulation cost quote.

Residential Areas Serviced in Alberta:

We provide spray foam insulation services to homeowners across a wide stretch of central and northern Alberta. Our core service area runs from the communities north of Red Deer through Edmonton, St. Albert, Spruce Grove, Stony Plain, Fort McMurray, Grande Prairie, and nearby region. We also support many surrounding rural and suburban locations where reliable insulation can make a meaningful difference in comfort and energy efficiency. Wherever you are in these areas, you can count on consistent workmanship and a team that understands the unique demands of Alberta’s climate.

Call 1-780-963-4493 to get in touch with us.